SPECIALTY MARINE & OFFSHORE CHEMICALS
CR DEGREASER B PLUS
Fortified Heavy-Duty Solvent Degreaser & Sludge Penetrant
- 25L Pail
- 209L Steel drum
- 1000L IBC Tote
Quick Technical Data
- Base Formulation: Solvent / Emulsifiable Hydrocarbon
- Specific Gravity: 0.88 ± 0.03 @ 20°C
- Flash Point: > 62°C (PMCC)
- Suitable Surfaces: Epoxy, Polyurethane & Stainless Steel
- Target Residue: Heavy Fuel Oil (HFO), Crude Sludge & Waxes
High-Performance Hydrocarbon Breakdown for Demanding Cargo Tanks
CR Degreaser B Plus is an advanced solvent-based emulsifying agent engineered for rapid dissolution and removal of stubborn hydrocarbon residues, heavy fuel oils (HFO), asphaltic deposits, and heavy waxes from marine cargo holds and industrial tanks.
- Deep Penetration Power: Rapidly softens aged, dense crude residues and asphaltic scale.
- Clean Water Washdown: Readily emulsifies with both seawater and freshwater for easy rinsing.
- Operational Versatility: Engineered for direct line injection, closed-loop recirculation, and hand spray.
Direct Injection Method: Inject undiluted at 0.1% to 0.2% (1 to 2 liters per 1,000 liters of wash water) directly into the pressure side of the automatic tank cleaning machines. Recommended wash water temperature:
60°C – 80°C.Recirculation Method: Prepare a 2% to 5% chemical wash solution in freshwater or seawater. Circulate through machine wash heads and heaters for 2 to 6 hours depending on the deposit thickness.
Manual Hand Spraying: Spray neat onto bulkheads and stringers using low-pressure chemical pumps. Allow 30 to 45 minutes soaking time, then rinse with high-pressure water jets.
| Parameter | Typical Specification |
|---|---|
| Physical Appearance | Clear Amber Liquid |
| Specific Gravity (@ 20°C) | 0.88 ± 0.03 g/cm³ |
| Solubility in Water | Completely Emulsifiable |
| Flash Point | > 62°C (Pensky-Martens Closed Cup) |
| pH (Concentrate) | Neutral (~7.0) |
Safe On: Pure Epoxy, Phenolic Epoxy, Polyurethane, Stainless Steel (304/316), and Mild Steel.
Zinc Silicate Note: For zinc-silicate lined tanks, use our dedicated neutral cleaner: Zinc Safe Neutral HCF.
Handling & Storage: Store in original drums in a well-ventilated space between
15°C and 35°C. Always wear safety goggles, protective nitrile gloves, and chemical aprons during handling. Refer to the full Safety Data Sheet (SDS).
Total Package: Chemical Supply & Statutory Slop Disposal
Beyond chemical manufacturing, Cramoil holds statutory NEA licensing to collect, offload, and thermally treat hazardous marine slops, washings, and chemical waste directly at our 4 Tuas View Lane facility. Deliveries and slop collections are supported 24/7.
Need Product Specifications or Port Delivery Scheduling?
Contact our technical sales office for volume pricing, and emergency 24/7 port deliveries.